Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
- 10. Steering
   10.1. Technical characteristic
   10.2. Steering wheel
   10.3. Steering column
   10.4. Ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of steering with the amplifier
   10.8. Pump of the amplifier of steering
   10.9. Check of level of oil in system of steering with the hydraulic booster
   10:10. Tip of steering draft
   10:11. Steering draft
   10:12. Angles of installation of wheels
   10:13. Changes in system of steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



10.1. Technical characteristic

GENERAL INFORMATION

Key parameters of steering transfer without hydraulic booster

Transfer relation
23,8
Number of teeths of a driving gear wheel
6
Speed of a steering wheel from an emphasis against the stop
4,14
Diameter of a turn:
  – between walls
11,00 m
  – between sidewalks
10,55 m

Key parameters of steering transfer with the hydraulic booster

Transfer relation
17,9
Number of teeths of a driving gear wheel
8
Speed of a steering wheel from an emphasis against the stop
3,13
Diameter of a turn:
  – between walls
11,00 m
  – between sidewalks
10,55 m
Driving belt of the pump
Hutchinson 970 K4
Oil for system of steering with the hydraulic booster:
  – quantity
about 0,70 dm3
  – the recommended type
ATF Dexron H, Esso D 21065 or Shell 20137
Service
each 20 000 km of a run it is necessary to check oil level

Tightening moments

Nut of the spherical hinge of a rotary fist
35 Nanometer
Lock-nut of steering draft
45 Nanometer
Fastening of a shaft of a steering wheel to a transfer lath
15 Nanometer
Nut of fastening of a steering wheel
35 Nanometer
Bolts of fastening of steering transfer:
  – models till 1992
40 Nanometer
  – models since 1993
90 Nanometer
Spherical hinge of steering draft:
The early (continuous) fastener to a nave
45 Nanometer
Later (hollow) fastener to a nave
35 Nanometer

On the homepage