Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
- 10. Steering
   10.1. Technical characteristic
   10.2. Steering wheel
   10.3. Steering column
   10.4. Ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of steering with the amplifier
   10.8. Pump of the amplifier of steering
   10.9. Check of level of oil in system of steering with the hydraulic booster
   10:10. Tip of steering draft
   10:11. Steering draft
   10:12. Angles of installation of wheels
   10:13. Changes in system of steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



10:11. Steering draft

GENERAL INFORMATION

Prevention

At installation to the place of the spherical hinge it is necessary to use a new internal spring washer.


Removal

PERFORMANCE ORDER
1. To remove a tip of steering draft.
2. To remove collars and to shift a protective cover of steering transfer on steering draft.
3. To unscrew internal spherical hinged connection of steering draft from a gear lath, holding a gear lath from a provorachivaniye, fixing a lock washer of spherical hinged connection in couple of captures.
4. To remove steering draft and a lock washer.
5. To check a condition of steering draft.

Installation

PERFORMANCE ORDER
1. To establish a new lock washer on the end of a gear lath and to apply the means interfering unscrewing on internal threads of a carving of spherical hinged connection.
2. To screw up spherical hinged connection in a gear lath, holding a lock washer with couple of captures.
3. To establish a protective cover of steering transfer.
4. To establish a tip of steering draft.
5. To adjust installation of forward wheels.

On the homepage