Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
- 11. Suspension brackets
   - 11.1. Forward suspension bracket
      11.1.1. Technical characteristic
      11.1.2. Rotary fist
      11.1.3. Replacement of the forward hug bearing
      11.1.4. The lobby is resistant
      11.1.5. Repair of a forward rack
      11.1.6. Lower lever of a forward suspension bracket
      11.1.7. Lower spherical hinge of a forward suspension bracket
      11.1.8. Stabilizer of cross stability of a forward suspension bracket
      11.1.9. Connector of the stabilizer of cross stability of a forward suspension bracket
      11.1.10. Lower frame of a forward suspension bracket
   + 11.2. Back suspension bracket
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



11.1.8. Stabilizer of cross stability of a forward suspension bracket

GENERAL INFORMATION

Prevention

For fastening of a connector of the stabilizer it is necessary to use new nuts.


Fastening of the stabilizer

1 – connector,

2 – lever,

3 – stabilizer

Removal

PERFORMANCE ORDER
1. To lift a forward part of the car and to record on supports. To remove forward wheels.
2. To unscrew bolts of fastening of connectors of the stabilizer to the lower levers.
3. To unscrew nuts of fastening of connectors to the stabilizer of cross stability.
4. To apply combination tags on the stabilizer and clips of fastening of the stabilizer to the lower frame.
5. To unscrew tightening bolts (A) and to remove clips of fastening of the stabilizer to the lower frame, at the same time it is not required to remove a metal clip (In).
6. To take the stabilizer from under the car.

Installation

Installation is made in the sequence of the return to removal.

On the homepage