Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
- 11. Suspension brackets
   + 11.1. Forward suspension bracket
   - 11.2. Back suspension bracket
      11.2.1. Technical characteristic
      11.2.2. Replacement of the shock-absorber
      11.2.3. Replacement of torsions
      11.2.4. Stabilizer
      11.2.5. Suspension bracket lever
      11.2.6. Removal and installation of a back suspension bracket
      11.2.7. Adjustment of height of a suspension bracket of a body
      11.2.8. Naves of back wheels
      11.2.9. Features of a back suspension bracket of cars 4 x 4
      11.2.10. Replacement of a tank
      11.2.11. Removal and installation of the lever of a suspension bracket
      11.2.12. Removal and installation of the cylinder of a suspension bracket
      11.2.13. Removal of air from a hydraulic contour
      11.2.14. Removal and installation of the pump
      11.2.15. Removal and installation of a nave
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



11.2.2. Replacement of the shock-absorber

GENERAL INFORMATION

Prevention

During removal and installation of shock-absorbers of a back suspension bracket the car has to stand on wheels.


Installation of the shock-absorber

1 – shock-absorber,

2 – fastening to a cross-piece,

3 – fastening to the lever,

X = 328 mm – shock-absorber axis distance at screwing up of connections

PERFORMANCE ORDER
1. To place the car on the elevator.
2. To unscrew a nut of fastening of the shock-absorber to the lever of a suspension bracket and to remove laying.
3. To move an axis back for extraction of the shock-absorber from a nest on the lever.
4. To unscrew a nut of fastening of the shock-absorber to the top axis.
5. To remove the shock-absorber and on its place to establish new together with axes. It is not necessary to screw up connections.
6. To establish distance of an axis of points of fastening of the shock-absorber by the size X = 328 mm, squeezing a suspension bracket by means of adaptation 0.908U.
7. To tighten nuts the corresponding moment.

On the homepage