Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


Experience the thrill of binge-watching on Soap2day. e1bd1949



13:19. Lock of a trunk lid (Sedan model)

TRUNK LID LOCK CYLINDER

Removal

PERFORMANCE ORDER
1. To open a trunk lid.
2. To take percussion caps of fastening of an upholstery of a luggage carrier and to turn off finishing of a luggage carrier from the upper edge of the luggage compartment.
3. To drill rivets (it is specified by an arrow) fastenings of the top part of exterior finish of a luggage carrier and to remove finishing.
4. Working in the luggage compartment, to unscrew a bolt (it is specified by an arrow) and to disconnect draft from the lock cylinder.
5. To drill rivets or to unscrew bolts and to take the lock cylinder from the body panel.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal, taking into account the next moments.
2. To establish exterior finish of a luggage carrier and the cylinder of the lock with application of new rivets.
3. To check operation of the lock before installation for the former place of finishing of a luggage carrier.
4. To adjust position of draft of the cylinder of the lock (weakening a bolt and moving draft).

TRUNK LID LOCK

Removal

PERFORMANCE ORDER
1. To open a trunk lid.
2. To take percussion caps of fastening of an upholstery of a luggage carrier and to turn off finishing of a luggage carrier from the upper edge of the luggage compartment.
3. To unscrew two bolts, to remove the lock and to disconnect draft.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.
2. To check operation of the lock before installation for the former place of finishing of a luggage carrier.

LOCKING PLATE OF THE LOCK OF THE TRUNK LID

The locking plate is screwed on a trunk lid by two bolts. The plate by its movement within the extended openings under a bolt is regulated.

On the homepage