Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   - 3.1. Petrol engines
      3.1.1. Technical characteristic
      - 3.1.2. Repair of the engine
         + 3.1.2.1. The repair which is not demanding removal of the engine
         - 3.1.2.2. Removal of the engine
            3.1.2.2.1. With the mechanical transmission
            3.1.2.2.2. With the automatic transmission
         3.1.2.3. Installation of the engine
         3.1.2.4. Dismantling of the engine
         + 3.1.2.5. Assembly of the engine
         3.1.2.6. Start of the engine after capital repairs
   + 3.2. Diesel engines
   + 3.3. Petrol engine 1,4 of dm3
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



3.1.2.2.2. With the automatic transmission

GENERAL INFORMATION

The engine and automatic transmission are removed only together.

Removal of the engine is made similar to removal with the mechanical transmission. It is in addition necessary:

 – to remove a probe pipe for measurement of level of oil in the transmission;
 – to remove wires of blocking of a starter and a wire of weight from the top part of the transmission;
 – to remove the steering drive with the amplifier;
 – to remove the speedometer drive.


On the homepage