Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical characteristic
      + 3.2.2. Adjustments of the engine
      3.2.3. Removal and installation of the fuel pump of high pressure
      3.2.4. Installation of the fuel pump of high pressure BOSCH
      3.2.5. Installation of the fuel pump of high pressure Roto Diesel
      3.2.6. Removal of water from the fuel filter
      3.2.7. Removal of air from fuel system
      3.2.8. Removal and installation of a nozzle
      3.2.9. Check electrically the operated engine stop valve
      3.2.10. Adjustment of the pump Bosch
      3.2.11. Adjustment of the pump Roto Diesel
      3.2.12. Removal and installation of a turbocompressor
      + 3.2.13. The repair which is not demanding removal of the engine
      3.2.14. Removal of the engine
      3.2.15. Installation of the engine
      3.2.16. Dismantling of the engine
      3.2.17. Assembly of the engine
      3.2.18. Oil pump
      + 3.2.19. Cooling system
      3.2.20. System of production of exhaust gases
   + 3.3. Petrol engine 1,4 of dm3
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



3.2.15. Installation of the engine

GENERAL INFORMATION

For installation of the engine it is necessary to perform operations in the return sequence in relation to its removal, and it is necessary to observe the following instructions.

PERFORMANCE ORDER
1. To replace:
      – самоконтрящиеся nuts;
      – holders which are not dismantled;
      – sealing rings of power shafts (in a transmission case).
2. To adjust a tension of a belt of the drive of a servonasos of the amplifier of steering.
3. Establish power shafts.
4. Install the car on wheels and connect stabilizer connectors to levers.
5. Fill in oil in the transmission and the engine.
6. Remove air from fuel system.
7. Fill the cooling system with cooling liquid and remove air from the cooling system.

On the homepage