Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engines
   - 3.3. Petrol engine 1,4 of dm3
      3.3.1. Technical characteristic
      3.3.2. Check and adjustment of a gap of valves
      3.3.3. Check and adjustment of a corner of an advancing of ignition
      3.3.4. Adjustment of the carburetor
      3.3.5. Removal of the air filter
      3.3.6. Removal of a head of the block of cylinders
      3.3.7. Installation of a head of the block of cylinders
      3.3.8. Removal and installation of the power unit with the petrol engine 1,4 of dm3
      3.3.9. Features of dismantling of the petrol engine 1,4 of dm3
      3.3.10. Dismantling of the TU3 engine
      3.3.11. Dismantling of a head of the block of cylinders
      3.3.12. Assembly of a head of the block of cylinders
      3.3.13. Determination of the size of inserts
      3.3.14. Assembly of the TU3 engine
      3.3.15. Removal of the oil pump
      3.3.16. Dismantling of the oil pump
      3.3.17. Removal of the pump of cooling liquid
      3.3.18. Service and repair of the MA transmission
      3.3.19. Removal and installation of the MA transmission
      3.3.20. Dismantling of the transmission
      3.3.21. Dismantling of a secondary shaft
      3.3.22. Dismantling of a main shaft
      3.3.23. Dismantling of differential
      3.3.24. Dismantling of knot of forks with their axes
      3.3.25. Dismantling of the plug of synchronizers
      3.3.26. Verification of parts of the transmission
      3.3.27. Assembly of the plug of synchronizers
      3.3.28. Assembly of knot of forks with their axes
      3.3.29. Assembly of differential
      3.3.30. Assembly of a main shaft
      3.3.31. Assembly of a secondary shaft
      3.3.32. Assembly of the transmission
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



3.3.17. Removal of the pump of cooling liquid

PERFORMANCE ORDER
1. To disconnect a weight wire from the accumulator.
2. To merge cooling liquid from system.
3. To take off maple a generator belt.
4. To unscrew three bolts of fastening of a pulley of a bent shaft and to remove a pulley.
5. To unscrew bolts of fastening and to remove a three-element casing of a gear belt.
6. To turn a bent shaft (for a bolt of a pulley of a bent shaft) to situation in which it is possible to insert the adjusting core with a diameter of 6 mm serving for fixation of a flywheel (in a back wall of the block of cylinders), and also an adjusting core with a diameter of 10 mm for fixation of the camshaft (in a forward wall of a head of the block of cylinders).
7. To weaken a bolt of a tension roller of a gear belt and to take off a gear belt from a pulley of the pump of cooling liquid.
8. To unscrew bolts of fastening of the pump of cooling liquid to the block of cylinders and to take the pump.
9. To remove sealing laying from the pump.
10. Installation of the pump is carried out in the return sequence.

On the homepage