Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engines
   - 3.3. Petrol engine 1,4 of dm3
      3.3.1. Technical characteristic
      3.3.2. Check and adjustment of a gap of valves
      3.3.3. Check and adjustment of a corner of an advancing of ignition
      3.3.4. Adjustment of the carburetor
      3.3.5. Removal of the air filter
      3.3.6. Removal of a head of the block of cylinders
      3.3.7. Installation of a head of the block of cylinders
      3.3.8. Removal and installation of the power unit with the petrol engine 1,4 of dm3
      3.3.9. Features of dismantling of the petrol engine 1,4 of dm3
      3.3.10. Dismantling of the TU3 engine
      3.3.11. Dismantling of a head of the block of cylinders
      3.3.12. Assembly of a head of the block of cylinders
      3.3.13. Determination of the size of inserts
      3.3.14. Assembly of the TU3 engine
      3.3.15. Removal of the oil pump
      3.3.16. Dismantling of the oil pump
      3.3.17. Removal of the pump of cooling liquid
      3.3.18. Service and repair of the MA transmission
      3.3.19. Removal and installation of the MA transmission
      3.3.20. Dismantling of the transmission
      3.3.21. Dismantling of a secondary shaft
      3.3.22. Dismantling of a main shaft
      3.3.23. Dismantling of differential
      3.3.24. Dismantling of knot of forks with their axes
      3.3.25. Dismantling of the plug of synchronizers
      3.3.26. Verification of parts of the transmission
      3.3.27. Assembly of the plug of synchronizers
      3.3.28. Assembly of knot of forks with their axes
      3.3.29. Assembly of differential
      3.3.30. Assembly of a main shaft
      3.3.31. Assembly of a secondary shaft
      3.3.32. Assembly of the transmission
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



3.3.26. Verification of parts of the transmission

GENERAL INFORMATION

Internal mechanism of gear shifting
1 – selector axis,
2 – choice lever knot transfer,
3 – a selector axis spring with two washers,
4 – forelocks,
5 – selector,
6 – selector holder,
7 – laying of an axis of the selector,
8 – axis of forks of 1-2 transfers, and also back
and the 5th transfers,
9 – forks of 1-2 transfers,
10 – forks of the 5th transfer,
11 – forks of the reverse gear,
12 – angular lever of forks of the reverse gear,
13 – axis of forks of 3-4 transfers,
14 – spring,
15 – the blocking forelock,
16 – core

PERFORMANCE ORDER
1. After dismantling of the transmission it is necessary to clear and degrease all details.
2. To replace details which bear traces of decolouration, stratification and deleting.
3. In case of detection of traces of fatigue wear of teeths of one of gear wheels it is also necessary to replace a pair gear wheel.

On the homepage