Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engines
   + 3.3. Petrol engine 1,4 of dm3
   - 3.4. System of ignition
      - 3.4.1. Contactless system of ignition
         3.4.1.1. Ignition coil
         3.4.1.2. Module amplifier of system of ignition
         3.4.1.3. Removal and installation of the distributor of ignition
         3.4.1.4. Dismantling and assembly of the Ducellier distributor
         3.4.1.5. Dismantling and assembly of the Bosch distributor
         3.4.1.6. Installation of a corner of an advancing of ignition
         3.4.1.7. Check of the centrifugal regulator in the car
         3.4.1.8. Check of the vacuum regulator in the car
      + 3.4.2. Compound system of ignition (ignition / fuel system)
      + 3.4.3. Direct system of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949 наблюдение в динамике



3.4.1.5. Dismantling and assembly of the Bosch distributor

GENERAL INFORMATION

Bosch distributor

1 – distributor cover,
2 – distributor rotor,
3 – antidust casing,
4 – distributor case,
6 – generator of impulses,
7 – rotor,
8 – centrifugal regulator,
9 – vacuum regulator

Dismantling

PERFORMANCE ORDER
1. To remove the distributor.
2. To take out a rotor of the distributor and an antidust casing.
3. To take the top bearing (2 bolts).
4. To take the big ring serving by the holder for bearing bolts.
5. To take the wire socket hub.
6. To remove the spring ring placed on a core.
7. To unscrew bolts of fastening of the vacuum regulator and other elements of fastening.
8. To take the vacuum regulator.
9. Through a special opening to unhook a spring of the centrifugal regulator.
10. To take out a disk.

Assembly

PERFORMANCE ORDER
1. To perform operations in the return sequence in relation to dismantling process.
2. To install the vacuum regulator on a disk ledge.
3. To install the distributor.

On the homepage