Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
- 5. Lubrication systems, coolings
   - 5.1. Lubrication system
      5.1.1. Oil pallet
      5.1.2. Oil pump
      5.1.3. Oil heater
      5.1.4. Check of pressure of oil
   + 5.2. Cooling system
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949 товары для похода и туризма



5.1.2. Oil pump

GENERAL INFORMATION

Unscrewing of a cover of the oil pump


Extraction of a spring


Extraction of the piston of the safety valve


Removal

PERFORMANCE ORDER
1. To remove the oil pallet.
2. To unscrew three bolts fixing the oil pump to the block of cylinders.
3. To remove a pump asterisk from a chain and to remove the oil pump.

Check

PERFORMANCE ORDER
1. To check an asterisk of the oil pump for damages and wear. If the asterisk is worn-out, to replace the pump.
2. To unscrew bolts of fastening of the mesh filter to the pump, to remove the mesh filter, the safety valve and a spring.
3. To check a side play of gear wheels of the oil pump of rather basic surface (at most 0,05 mm).
4. To check the piston and a spring of the safety valve for wear.
5. To clear the mesh filter of the oil pump.

Installation

Installation is made in the sequence, the return to removal.

On the homepage