Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
- 5. Lubrication systems, coolings
   - 5.1. Lubrication system
      5.1.1. Oil pallet
      5.1.2. Oil pump
      5.1.3. Oil heater
      5.1.4. Check of pressure of oil
   + 5.2. Cooling system
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



5.1.3. Oil heater

GENERAL INFORMATION

Bolt of fastening of a radiator and groove of installation

And – a bolt of fastening of a radiator,

In – an installation groove

Removal and installation

PERFORMANCE ORDER
1. To lift a forward part of the car.
2. To merge cooling liquid from system or to press hoses of a supply of cooling liquid to the oil heater.
3. To install a container under an oil filter and to unscrew the filter.
4. To remove hoses of a supply of cooling liquid to the oil heater.
5. To unscrew a bolt of fastening of the oil heater from the block of cylinders and to remove a radiator.
6. To establish new ring consolidation on dredging of a radiator from the block of cylinders.
7. To install a radiator on the block of cylinders, at the same time the groove of installation has to be combined with a ledge on the block of cylinders.
8. To establish an oil filter.
9. To fill in cooling liquid in system.

On the homepage