Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
- 10. Steering
   10.1. Technical characteristic
   10.2. Steering wheel
   10.3. Steering column
   10.4. Ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of steering with the amplifier
   10.8. Pump of the amplifier of steering
   10.9. Check of level of oil in system of steering with the hydraulic booster
   10:10. Tip of steering draft
   10:11. Steering draft
   10:12. Angles of installation of wheels
   10:13. Changes in system of steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


10. Steering


Placement of elements of steering and suspension brackets of the car

The system of steering has rack steering transfer and a safe steering column. The steering column of management has the universal hinge located in the middle of length which is connected with the intermediate shaft having the second universal hinge in the lower part. The lower universal hinge fastens to a gear wheel of steering transfer by a tightening bolt.

Steering transfer is established on a forward lower frame and connected by two steering drafts to spherical hinges on the external ends with a rotary fist. Steering draft on the end has a carving for adjustment of angles of installation of wheels. Steering drafts are connected by spherical hinges to rack steering transfer.

Steering with the hydraulic booster (additional equipment) has bladed the pump of high pressure (given by a belt from a pulley of a bent shaft), the rotary dividing valve and the hydraulic servomotor.

On the homepage