Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
- 10. Steering
   10.1. Technical characteristic
   10.2. Steering wheel
   10.3. Steering column
   10.4. Ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of steering with the amplifier
   10.8. Pump of the amplifier of steering
   10.9. Check of level of oil in system of steering with the hydraulic booster
   10:10. Tip of steering draft
   10:11. Steering draft
   10:12. Angles of installation of wheels
   10:13. Changes in system of steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949 Купить лайтбокс для фотосъемки.
балкон
Светильники для потолков натяжных.
яндекс такси брендирование
Здесь автосалон подержанных автомобилей в красноярске.



10.9. Check of level of oil in system of steering with the hydraulic booster

GENERAL INFORMATION

Prevention

Level of oil depends on temperature.


Check

PERFORMANCE ORDER
1. At the idle engine to establish wheels for the movement directly forward.
2. To check oil level in a tank.
3. To add amount of oil so that its level was between two tags. Oil level never has to be below the sign "mini".

Replacement

PERFORMANCE ORDER
1. To put the car over a hole or on the elevator. To switch-off the accumulator.
2. To merge oil from a hydraulic contour, having disconnected a hose of high pressure from the dividing valve. To finish discharge of oil from a contour, turning several times a steering wheel in both directions against the stop.
3. To check whether connections of high and low pressure are well fixed.
4. To fill in 0,3 dm3 of oil in a pump tank.
5. At the idle engine slowly to turn a steering wheel in both directions against the stop.
6. To add amount of oil in a tank to the required level.
7. To start the engine.
8. To remove air from a contour, turning several times forward wheels in both directions against the stop and adding oil in process of decrease in its level in a tank.

On the homepage