Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
- 10. Steering
   10.1. Technical characteristic
   10.2. Steering wheel
   10.3. Steering column
   10.4. Ignition lock
   10.5. Steering transfer
   10.6. Replacement of protective covers of the steering mechanism
   10.7. Removal of air from system of steering with the amplifier
   10.8. Pump of the amplifier of steering
   10.9. Check of level of oil in system of steering with the hydraulic booster
   10:10. Tip of steering draft
   10:11. Steering draft
   10:12. Angles of installation of wheels
   10:13. Changes in system of steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment

10:13. Changes in system of steering

GENERAL INFORMATION

Installation of rack steering transfer

1, 2 – washers,

3 – rack steering transfer,

4 – cross-piece

Changes are made in cross-pieces and in cases of steering transfers that caused modification of installation of linings between steering transfer and a cross-piece, and also under bolts. It is necessary to observe the method of installation and value presented in the drawing and in tables.

System of steering without hydraulic booster

Elements	To a body No. 8026333	From No. 8026334 to No. 8030427	From a body No. 8030428
Transfer case	basic surface of an otfrezerovan	the basic surface is not milled	the basic surface is not milled
Cross-piece (4)	old type	new type	new type
Thickness of a washer (1)	2 mm	4 mm	2 mm
Thickness of a washer (2)	4 mm	2 mm	2 mm

Elements	To a body No. 8026333	From a body No. 8026334
Transfer case	basic surface of an otfrezerovan	the basic surface is not milled
Cross-piece (4)	old type	new type
Washer (1)	no	no
Thickness of a washer (2)	4 mm	2 mm

On the homepage