Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Fuel system
+ 4.1. Fuel system with the carburetor
- 4.2. Single-point systems of injection of fuel
4.2.1. Removal of pressure in fuel system
4.2.2. Adjustment of a cable of an accelerator
4.2.3. Fuel pump
4.2.4. Injector
4.2.5. Check of system of injection of fuel
4.2.6. Elements of system of injection Fenix
4.2.7. Elements of system of injection Bosch Monopoint
4.2.8. Elements of system of injection Magneti Marelli
+ 4.3. Multipoint systems of injection of fuel
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
|
Check
| PERFORMANCE ORDER |
| 1. To check reliability of connection of wires and lack of corrosion. |
| 2. To check a condition of the air filter and spark plugs. |
| 3. To check compression pressure in engine cylinders. |
| 4. To check installation of a corner of an advancing of ignition. |
|
Adjustment
On the Fenix and Bosch systems, regulation is not provided. If the speed of idling or composition of mix do not meet standard, so the control unit is damaged.
On the Magneti Marelli system, regulation of installation of mix and a corner of an advancing of ignition is possible. However, regulation can be made only ECU reprogramming, with use of the special diagnostic equipment. |
On the homepage
|
