Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
- 7. Coupling
   7.1. Technical characteristic
   7.2. Replacement of a disk or leading part of coupling
   7.3. Adjustment of knot of management of coupling
   7.4. Replacement of a cable of coupling
   7.5. Coupling switching off mechanism
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment

7.1. Technical characteristic

GENERAL INFORMATION

Clutch plate

Brand	Valeo
Diameter is external:
– TU engine	180 mm
– the XU engine with 8 valves	200 mm
– the XU engine with 16 valves	215 mm
Type of slips	Ferodo 202

Management of coupling

Bearing release	ball, continuous contact
Management	by means of a cable
Coupling pedal course:
– models till 1992	145 mm
– models since 1992	162 ± 12 mm

Coupling of cars with the drive 4 x 4

Cars with the drive on four wheels have coupling of bigger diameter.

Leading part of coupling	215 CP 4850
Diameter of a disk	215 mm
Type of slips	Valeo 202

The cable of coupling is fixed differently, the cover influences directly the coupling switching off lever. The cable fastens to a motionless basic element.

Characteristic sizes of the amount of adjustment of coupling were left without changes.

Leading part of coupling

Brand and type	Valeo 200 CP 450
Clip force	4500 N

Tightening moments

Bolts of fastening of the leading part of coupling	25 Nanometer
Bolts on box perimeter	45 Nanometer
Bolts of fastening of a flywheel to a bent shaft	50 Nanometer

On the homepage

QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE