Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
- 1. Maintenance instruction
   1.2. Governing bodies, devices and equipment
   1.3. Keys
   1.4. Pressure in tires.
   1.5. Doors
   1.6. Mouth of the fuel tank, luggage carrier, cowl
   1.7. Seat belts
   + 1.8. Seats
   1.9. Dashboard
   1.10. Lighting and alarm system
   1.11. Proofreader of light of headlights
   1.12. Washers and cleaners of glasses
   1.13. Additional equipment
   1.14. Ensuring comfort
   + 1.15. Internal heating and ventilation
   1.16. Combinations of devices
   1.17. Start of the petrol engine
   1.18. Start of the diesel engine
   1.19. Control bulbs and indexes
   1.20. Steering wheel, gear shifting and brake
   1.21. Automatic transmission
   1.22. Replacement of a wheel
   1.23. Towage
   1.24. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949 анализатор для покера



1.10. Lighting and alarm system

GENERAL INFORMATION

The switch of external lighting, indexes of turns and sound signal is under a steering wheel on the left side.

1 – lighting and the alarm system in position 0, 1 or 2 of the switch,

2 – change of intensity of illumination of a combination of devices

Alarm system light

To pull the switch lever on itself.

Indexes of turns

For the alarm system about intention of change of the movement to the right or to the left it is necessary to move the switch lever up or down (to the planes parallel to a steering wheel). For the notification about intention of crossing or change of a lane it is not necessary to move the switch up to the end, overcoming resistance. Upon termination of maneuver it is necessary to weaken pressure upon the switch lever.

Sound signal

To press a lighting switch end face.

Change of intensity of illumination of a combination of devices

For adjustment of illumination of a combination of devices it is necessary to use the handle placed under a steering wheel on a steering column.

3 – situation 0: lighting is switched off; at start of the engine the fading passing beam is automatically turned on

4 – situation 1: lobbies and back marker lights (a control bulb on a combination of devices); it is necessary to turn the switch on a quarter of a turn forward

5 – situation 2: near and far light of headlights (control bulbs on a combination of devices). To turn the switch against the stop. In this situation to pull the switch handle in the direction of a steering wheel, overcoming resistance. It turns on driving beam (and the control bulb on a combination of devices lights up). For repeated inclusion of passing beam of headlights it is necessary to pull repeatedly the switch handle in the direction of a steering wheel


On the homepage