Peugeot 405

1987-1997 of release

Repair and operation of the car


Peugeot 405
- 1. Maintenance instruction
   1.2. Governing bodies, devices and equipment
   1.3. Keys
   1.4. Pressure in tires.
   1.5. Doors
   1.6. Mouth of the fuel tank, luggage carrier, cowl
   1.7. Seat belts
   + 1.8. Seats
   1.9. Dashboard
   1.10. Lighting and alarm system
   1.11. Proofreader of light of headlights
   1.12. Washers and cleaners of glasses
   1.13. Additional equipment
   1.14. Ensuring comfort
   + 1.15. Internal heating and ventilation
   1.16. Combinations of devices
   1.17. Start of the petrol engine
   1.18. Start of the diesel engine
   1.19. Control bulbs and indexes
   1.20. Steering wheel, gear shifting and brake
   1.21. Automatic transmission
   1.22. Replacement of a wheel
   1.23. Towage
   1.24. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949


1.13. Additional equipment
GENERAL INFORMATION

ALARM LIGHT SYSTEM

The button (1) of turning on of the alarm light system (with the built-in control bulb) is under average nozzles of ventilation.

HEATER OF BACK GLASS

Heating of back glass joins the button (2) (with the built-in control bulb) which is under average nozzles of ventilation.

Prevention

Heating of back glass should be included only at the working engine. As this warming device consumes big current, it should be disconnected as soon as visibility through back glass becomes satisfactory.

It is impossible to scrape at all on the internal surface of back glass as it can lead to damage of heating conductors.

ELECTRIC CLOCK

Management of hours (3): And – the button of installation of hours, In – the button of installation of minutes.

BACK FOG LAMPS

Back fog lamps join the button (4) (with the built-in control bulb) which is under the left side nozzle of ventilation. Back fog lamps light up only when headlights of passing beam are included. In the conditions of good visibility back fog lamps can hinder for drivers of the cars moving behind therefore these lamps should be used only in the conditions of fog.

FORWARD FOG LIGHTS

These headlights join the button (5) (with the built-in control bulb) which is on the left side of the button of inclusion of back fog lamps. Functioning of forward fog lights depends on inclusion of passing beam of headlights.


On the homepage