Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
- 1. Maintenance instruction
   1.2. Governing bodies, devices and equipment
   1.3. Keys
   1.4. Pressure in tires.
   1.5. Doors
   1.6. Mouth of the fuel tank, luggage carrier, cowl
   1.7. Seat belts
   + 1.8. Seats
   1.9. Dashboard
   1.10. Lighting and alarm system
   1.11. Proofreader of light of headlights
   1.12. Washers and cleaners of glasses
   1.13. Additional equipment
   1.14. Ensuring comfort
   + 1.15. Internal heating and ventilation
   1.16. Combinations of devices
   1.17. Start of the petrol engine
   1.18. Start of the diesel engine
   1.19. Control bulbs and indexes
   1.20. Steering wheel, gear shifting and brake
   1.21. Automatic transmission
   1.22. Replacement of a wheel
   1.23. Towage
   1.24. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


1.22. Replacement of a wheel


The jack and the handle (1) for it are in a compartment about a back wall (in versions with a body like sedan) or in the left back wing, behind a covering (in versions with a body like komba). For extraction of a jack (in versions with a body like komba) it is necessary to move it forward, to lift and involve behind. The spare wheel (3) is in a special basket (2) in the bottom of a back part of the car. From each party of the car there are two strengthened places (4) which serve also as a support for a jack.

Actions when replacing a wheel

1. Install the car, whenever possible, on a flat and firm surface.
2. Tighten the emergency brake and insert wedges under wheels of the opposite side of the car.
3. Include 1 or the reverse gear.
4. Take from a luggage carrier a jack and the handle for it.
5. Unscrew the handle a nut of fastening of a basket of a spare wheel.
6. Take a basket outside and release a hook.
7. Lower a basket.
8. Get a spare wheel.
9. By means of the handle take off a cap of the removed wheel.
10. The handle release screws of fastening of the removed wheel.
11. Place a head of a jack under the place intended for a car raising (located about the removed wheel).
12. Check that the head of a jack is placed under the necessary place, and lift the car a jack.
13. Unscrew four bolts and remove a wheel.
14. Establish a spare wheel and screw in by hand four bolts.
15. Screw up bolts a wrench not against the stop.
16. Lower the car, get a jack and finally tighten bolts.
17. Insert a cap, installing an opening on the nipple in the appropriate place. Strike with a palm for a zashchelkivaniye of hooks.
18. Place the removed wheel in a basket so that its external surface was turned top.
19. Lift a basket as it is possible above and hook on it.
20. In a luggage carrier put the clamp of fastening against the stop.
21. Place a jack and the handle in their nest.
22. Urgently repair the damaged wheel, pump up it up to the necessary pressure and dynamically balance.

On the homepage