Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engines
   + 3.3. Petrol engine 1,4 of dm3
   - 3.4. System of ignition
      + 3.4.1. Contactless system of ignition
      - 3.4.2. Compound system of ignition (ignition / fuel system)
         3.4.2.1. Ignition coil
         3.4.2.2. Module amplifier of system of ignition
         3.4.2.3. Removal of the distributor of ignition
         3.4.2.4. Installation of the distributor of ignition
      + 3.4.3. Direct system of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment

3.4.2.1. Ignition coil

GENERAL INFORMATION

The coil of ignition is installed at the left end face of a head of the block of cylinders.

PERFORMANCE ORDER

1. To remove a weight wire from the accumulator.

2. To remove the socket from the ignition coil.

3. To note the provision of high-voltage wires on the coil of ignition and to remove them from coil plugs.

4. To unscrew four screws of fastening and to remove the ignition coil.

On the homepage

QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE