Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engines
   - 3.3. Petrol engine 1,4 of dm3
      3.3.1. Technical characteristic
      3.3.2. Check and adjustment of a gap of valves
      3.3.3. Check and adjustment of a corner of an advancing of ignition
      3.3.4. Adjustment of the carburetor
      3.3.5. Removal of the air filter
      3.3.6. Removal of a head of the block of cylinders
      3.3.7. Installation of a head of the block of cylinders
      3.3.8. Removal and installation of the power unit with the petrol engine 1,4 of dm3
      3.3.9. Features of dismantling of the petrol engine 1,4 of dm3
      3.3.10. Dismantling of the TU3 engine
      3.3.11. Dismantling of a head of the block of cylinders
      3.3.12. Assembly of a head of the block of cylinders
      3.3.13. Determination of the size of inserts
      3.3.14. Assembly of the TU3 engine
      3.3.15. Removal of the oil pump
      3.3.16. Dismantling of the oil pump
      3.3.17. Removal of the pump of cooling liquid
      3.3.18. Service and repair of the MA transmission
      3.3.19. Removal and installation of the MA transmission
      3.3.20. Dismantling of the transmission
      3.3.21. Dismantling of a secondary shaft
      3.3.22. Dismantling of a main shaft
      3.3.23. Dismantling of differential
      3.3.24. Dismantling of knot of forks with their axes
      3.3.25. Dismantling of the plug of synchronizers
      3.3.26. Verification of parts of the transmission
      3.3.27. Assembly of the plug of synchronizers
      3.3.28. Assembly of knot of forks with their axes
      3.3.29. Assembly of differential
      3.3.30. Assembly of a main shaft
      3.3.31. Assembly of a secondary shaft
      3.3.32. Assembly of the transmission
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



3.3. Petrol engine 1,4 of dm3

GENERAL INFORMATION

TU3 engine cuts

and – a cross-section,
b – longitudinal section

The Peugeot 405 cars with petrol engines with a working volume of 1,4 dm3 intended for the Polish market since 1993 gather in Poland (at automobile plant in Lublin) with a kind of equipment of GL.

The main differences (in comparison with earlier described Peugeot cars) consist in use of the engine (TU family), and also the transmission (MA type) with the design different from earlier described models.

The technical characteristic of the Peugeot 405 GL 1,4 cars is given in this subsection, and also service and repair only of the engine and the transmission in volume of significantly different operations are described. Other knots structurally do not differ. At their service and repair it is necessary to use information which is contained in the main part of the offered Management and also the data provided in subsection 3.3.1.


On the homepage