Peugeot 405
1987-1997 of release
Repair and operation of the car
Peugeot 405
+
1. Maintenance instruction
+
2. Maintenance
-
3. Engines
+
3.1. Petrol engines
+
3.2. Diesel engines
-
3.3. Petrol engine 1,4 of dm3
3.3.1. Technical characteristic
3.3.2. Check and adjustment of a gap of valves
3.3.3. Check and adjustment of a corner of an advancing of ignition
3.3.4. Adjustment of the carburetor
3.3.5. Removal of the air filter
3.3.6. Removal of a head of the block of cylinders
3.3.7. Installation of a head of the block of cylinders
3.3.8. Removal and installation of the power unit with the petrol engine 1,4 of dm3
3.3.9. Features of dismantling of the petrol engine 1,4 of dm3
3.3.10. Dismantling of the TU3 engine
3.3.11. Dismantling of a head of the block of cylinders
3.3.12. Assembly of a head of the block of cylinders
3.3.13. Determination of the size of inserts
3.3.14. Assembly of the TU3 engine
3.3.15. Removal of the oil pump
3.3.16. Dismantling of the oil pump
3.3.17. Removal of the pump of cooling liquid
3.3.18. Service and repair of the MA transmission
3.3.19. Removal and installation of the MA transmission
3.3.20. Dismantling of the transmission
3.3.21. Dismantling of a secondary shaft
3.3.22. Dismantling of a main shaft
3.3.23. Dismantling of differential
3.3.24. Dismantling of knot of forks with their axes
3.3.25. Dismantling of the plug of synchronizers
3.3.26. Verification of parts of the transmission
3.3.27. Assembly of the plug of synchronizers
3.3.28. Assembly of knot of forks with their axes
3.3.29. Assembly of differential
3.3.30. Assembly of a main shaft
3.3.31. Assembly of a secondary shaft
3.3.32. Assembly of the transmission
+
3.4. System of ignition
+
4. Fuel system
+
5. Lubrication systems, coolings
+
6. System of release
+
7. Coupling
+
8. Transmissions
+
9. Power shafts
+
10. Steering
+
11. Suspension brackets
+
12. Brake system
+
13. Body
+
14. Electric equipment
3.3.27. Assembly of the plug of synchronizers
GENERAL INFORMATION
Cuts of synchronizers
and – the synchronizer of the 5th transfer,
b – synchronizer of 3-4 transfers,
with – the synchronizer of 1-2 transfers
PERFORMANCE ORDER
1.
To insert a nave and stoppers into the corresponding plug.
2.
To insert springs into the corresponding openings of stoppers and a nest of a nave, to insert balls.
3.
To press balls and to move the plug before landing of balls in plug nests.
On the homepage