Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engines
   - 3.3. Petrol engine 1,4 of dm3
      3.3.1. Technical characteristic
      3.3.2. Check and adjustment of a gap of valves
      3.3.3. Check and adjustment of a corner of an advancing of ignition
      3.3.4. Adjustment of the carburetor
      3.3.5. Removal of the air filter
      3.3.6. Removal of a head of the block of cylinders
      3.3.7. Installation of a head of the block of cylinders
      3.3.8. Removal and installation of the power unit with the petrol engine 1,4 of dm3
      3.3.9. Features of dismantling of the petrol engine 1,4 of dm3
      3.3.10. Dismantling of the TU3 engine
      3.3.11. Dismantling of a head of the block of cylinders
      3.3.12. Assembly of a head of the block of cylinders
      3.3.13. Determination of the size of inserts
      3.3.14. Assembly of the TU3 engine
      3.3.15. Removal of the oil pump
      3.3.16. Dismantling of the oil pump
      3.3.17. Removal of the pump of cooling liquid
      3.3.18. Service and repair of the MA transmission
      3.3.19. Removal and installation of the MA transmission
      3.3.20. Dismantling of the transmission
      3.3.21. Dismantling of a secondary shaft
      3.3.22. Dismantling of a main shaft
      3.3.23. Dismantling of differential
      3.3.24. Dismantling of knot of forks with their axes
      3.3.25. Dismantling of the plug of synchronizers
      3.3.26. Verification of parts of the transmission
      3.3.27. Assembly of the plug of synchronizers
      3.3.28. Assembly of knot of forks with their axes
      3.3.29. Assembly of differential
      3.3.30. Assembly of a main shaft
      3.3.31. Assembly of a secondary shaft
      3.3.32. Assembly of the transmission
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949 Что создали не просто очередной сексшоп.
мдф панель для стен: что это такое.
александр лебедев банкир
костюм мужской строгий



3.3.21. Dismantling of a secondary shaft

PERFORMANCE ORDER
1. To remove on the press from a shaft the back ball bearing.
2. To remove from a shaft laying, a gear wheel of the 4th transfer, a ring of the synchronizer of the 4th transfer, the sliding plug together with a nave of 3-4 transfers (without separation of the plug from a nave) and a ring of the synchronizer of the 3rd transfer.
3. To remove the spring fixing ring and a gear wheel of the 3rd transfer.
4. To remove the spring fixing ring and a gear wheel of the 2nd transfer.
5. To remove a ring of the synchronizer of the 2nd transfer, the sliding plug together with a nave of 1-2 transfers (without separation of the plug from a nave) and a ring of the synchronizer of the 1st transfer.
6. To remove the spring fixing ring and a gear wheel of the 1st transfer.
7. To remove the spring fixing ring of the forward bearing.
8. To remove the forward bearing on the press.

On the homepage