Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical characteristic
      + 3.2.2. Adjustments of the engine
      3.2.3. Removal and installation of the fuel pump of high pressure
      3.2.4. Installation of the fuel pump of high pressure BOSCH
      3.2.5. Installation of the fuel pump of high pressure Roto Diesel
      3.2.6. Removal of water from the fuel filter
      3.2.7. Removal of air from fuel system
      3.2.8. Removal and installation of a nozzle
      3.2.9. Check electrically the operated engine stop valve
      3.2.10. Adjustment of the pump Bosch
      3.2.11. Adjustment of the pump Roto Diesel
      3.2.12. Removal and installation of a turbocompressor
      + 3.2.13. The repair which is not demanding removal of the engine
      3.2.14. Removal of the engine
      3.2.15. Installation of the engine
      3.2.16. Dismantling of the engine
      3.2.17. Assembly of the engine
      3.2.18. Oil pump
      + 3.2.19. Cooling system
      3.2.20. System of production of exhaust gases
   + 3.3. Petrol engine 1,4 of dm3
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment

3.2. Diesel engines

GENERAL INFORMATION

Section of the XUD 9 engine

Engines are four-cycle, four-cylinder, line. Fastening of the engine – cross ahead of the car with an inclination back on 30 °.

The camshaft placed in a head of the block of cylinders is set in motion by a gear belt. These engines have water cooling.

Key parameters of the XUD 7TE engine:
– diameter of the cylinder	80 mm
– piston stroke	88 mm
– working volume	1769 ^cm3
– extent of compression	22
– compression pressure	2,5 – 3,0 MPas
– pressure is minimum	1,8 MPas
– the maximum speed without loading	4800 rpm
– maximum power	66/90 kW/h.p. at 4300 rpm
– maximum moment	180/18,3 Nanometers at 2000 rpm
Key parameters of the XUD 9 engine:
– diameter of the cylinder	83 mm
– piston stroke	88 mm
– working volume	1905 ^cm3
– extent of compression	23
– compression pressure	2,5 – 3,0 MPas
– pressure is minimum	1,8 MPas
– the maximum speed without loading	5150 rpm
– maximum power	51/70 kW/h.p. at 4600 rpm
– maximum moment	120/12,2 Nanometers at 2000 rpm
Key parameters of the XUD 9TE/L engine:
– engine capacity	1905 ^cm3
– diameter of the cylinder	83 mm
– piston stroke	88 mm
– working volume	1905 ^cm3
– extent of compression	21,8
– maximum power:
• according to ESE	67,5 kW at 4000 rpm
• according to DIN	92 h.p. at 4000 rpm
– maximum torque:
• according to ESE	196 Nanometer at 2250 rpm
• according to DIN	20 кгм at 2250 rpm

On the homepage