Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical characteristic
      + 3.2.2. Adjustments of the engine
      3.2.3. Removal and installation of the fuel pump of high pressure
      3.2.4. Installation of the fuel pump of high pressure BOSCH
      3.2.5. Installation of the fuel pump of high pressure Roto Diesel
      3.2.6. Removal of water from the fuel filter
      3.2.7. Removal of air from fuel system
      3.2.8. Removal and installation of a nozzle
      3.2.9. Check electrically the operated engine stop valve
      3.2.10. Adjustment of the pump Bosch
      3.2.11. Adjustment of the pump Roto Diesel
      3.2.12. Removal and installation of a turbocompressor
      + 3.2.13. The repair which is not demanding removal of the engine
      3.2.14. Removal of the engine
      3.2.15. Installation of the engine
      3.2.16. Dismantling of the engine
      3.2.17. Assembly of the engine
      3.2.18. Oil pump
      + 3.2.19. Cooling system
      3.2.20. System of production of exhaust gases
   + 3.3. Petrol engine 1,4 of dm3
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



3.2.14. Removal of the engine

GENERAL INFORMATION

Engine mount arms


1 – right arm,
2 – the pillow is elastic right,
3 – average arm,
4 – the pillow is elastic left,
5 – lower arm,
6 – clip

PERFORMANCE ORDER
1. Merge cooling liquid from the cooling system.
2. Merge oil from the transmission and the engine.
3. Remove a clip of the lower arm of the engine (1 – a bracket of the lower arm).
4. Disconnect a reception exhaust pipe.
5. Disconnect the stabilizer from levers.
6. Take the spherical hinge of the lower lever of a suspension bracket from a rotary fist.
7. Remove the right power shaft.
8. Take the left power shaft from differential (without taking out it from a nave).
9. Remove the accumulator.
10. Remove an accumulator arm together with the fuel filter.
11. Remove the air filter with the case.
12. In XUD 9 engines remove an absorption cap.
13. In THOSE XUD 7 engines remove a radiator of pressurization and disconnect the limiter of horizontal movement from the top right arm of the engine (1 – the limiter).
14. To disconnect an element of connection and a wire.
15. Remove сервонасос the amplifier of steering, without disconnecting it.
16. Remove a radiator.
17. Use the special load-lifting mechanism with two hooks. Place hooks so that during rise the engine was slightly inclined on the party of the transmission.
18. In THOSE XUD 7 engines remove the movement limiter.
19. Unscrew a nut of the top right arm of the engine from an elastic pillow.
20. Support the transmission by means of a jack.
21. Remove a transmission arm.
22. Raise the engine and remove the right arm of the engine (1 – a nut of the right arm).
23. Lower a jack and turn the engine clockwise.

24. Take from above the engine.


On the homepage