Peugeot 405

1987-1997 of release

Repair and operation of the car


Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical characteristic
      + 3.2.2. Adjustments of the engine
      3.2.3. Removal and installation of the fuel pump of high pressure
      3.2.4. Installation of the fuel pump of high pressure BOSCH
      3.2.5. Installation of the fuel pump of high pressure Roto Diesel
      3.2.6. Removal of water from the fuel filter
      3.2.7. Removal of air from fuel system
      3.2.8. Removal and installation of a nozzle
      3.2.9. Check electrically the operated engine stop valve
      3.2.10. Adjustment of the pump Bosch
      3.2.11. Adjustment of the pump Roto Diesel
      3.2.12. Removal and installation of a turbocompressor
      + 3.2.13. The repair which is not demanding removal of the engine
      3.2.14. Removal of the engine
      3.2.15. Installation of the engine
      3.2.16. Dismantling of the engine
      3.2.17. Assembly of the engine
      3.2.18. Oil pump
      - 3.2.19. Cooling system
         3.2.19.1. Discharge of cooling liquid
         3.2.19.2. Filling of cooling liquid and removal of air
         3.2.19.3. Removal and installation of the pump of cooling liquid
      3.2.20. System of production of exhaust gases
   + 3.3. Petrol engine 1,4 of dm3
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949


3.2.19. Cooling system

3.2.19.1. Discharge of cooling liquid
GENERAL INFORMATION

Cooling system

1 – a radiator with a broad tank,
2 – pump of cooling liquid,
3 – thermostat case,
4 – thermostat cover,
5 – thermostat,
6 – fan engine,
7 – fan, 		8 – fan thermal sensor,
9 – sensor of temperature of cooling liquid,
10 – temperature sensor of management of an alarm system bulb,
11 – heater radiator,
12 – heat exchanger oil-cooling liquid

Stopper of discharge of cooling liquid in the block of cylinders of the engine

1 – stopper of discharge of cooling liquid
 
Stopper of discharge of cooling liquid

The stopper of discharge of cooling liquid is specified by an arrow.

Remove the traffic jams located in the lower part of a radiator and on the block of cylinders of the engine (it is necessary to remove a stopper from the broad tank connected to a radiator).
On the homepage






QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE