Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engines
   - 3.3. Petrol engine 1,4 of dm3
      3.3.1. Technical characteristic
      3.3.2. Check and adjustment of a gap of valves
      3.3.3. Check and adjustment of a corner of an advancing of ignition
      3.3.4. Adjustment of the carburetor
      3.3.5. Removal of the air filter
      3.3.6. Removal of a head of the block of cylinders
      3.3.7. Installation of a head of the block of cylinders
      3.3.8. Removal and installation of the power unit with the petrol engine 1,4 of dm3
      3.3.9. Features of dismantling of the petrol engine 1,4 of dm3
      3.3.10. Dismantling of the TU3 engine
      3.3.11. Dismantling of a head of the block of cylinders
      3.3.12. Assembly of a head of the block of cylinders
      3.3.13. Determination of the size of inserts
      3.3.14. Assembly of the TU3 engine
      3.3.15. Removal of the oil pump
      3.3.16. Dismantling of the oil pump
      3.3.17. Removal of the pump of cooling liquid
      3.3.18. Service and repair of the MA transmission
      3.3.19. Removal and installation of the MA transmission
      3.3.20. Dismantling of the transmission
      3.3.21. Dismantling of a secondary shaft
      3.3.22. Dismantling of a main shaft
      3.3.23. Dismantling of differential
      3.3.24. Dismantling of knot of forks with their axes
      3.3.25. Dismantling of the plug of synchronizers
      3.3.26. Verification of parts of the transmission
      3.3.27. Assembly of the plug of synchronizers
      3.3.28. Assembly of knot of forks with their axes
      3.3.29. Assembly of differential
      3.3.30. Assembly of a main shaft
      3.3.31. Assembly of a secondary shaft
      3.3.32. Assembly of the transmission
   + 3.4. System of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment

3.3.23. Dismantling of differential

GENERAL INFORMATION

In case of damage of the conducted gear wheel of the main transfer it is not necessary to remove a gear wheel from a case, it is better to replace all knot (a gear wheel together with a box).

PERFORMANCE ORDER

1. To remove the fixing ring of an axis of satellites.

2. To remove an axis of satellites and to take satellites.

3. To take semi-axial gear wheels and a basket of differential.

4. To remove a worm of the drive of a speedometer, and also conic bearings from a differential case.

On the homepage