Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engines
   + 3.3. Petrol engine 1,4 of dm3
   - 3.4. System of ignition
      + 3.4.1. Contactless system of ignition
      - 3.4.2. Compound system of ignition (ignition / fuel system)
         3.4.2.1. Ignition coil
         3.4.2.2. Module amplifier of system of ignition
         3.4.2.3. Removal of the distributor of ignition
         3.4.2.4. Installation of the distributor of ignition
      + 3.4.3. Direct system of ignition
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



3.4.2.4. Installation of the distributor of ignition

PERFORMANCE ORDER
1. On XU9J4 engines with 16 valves to install the plastic support plate to an end face of a head of the block of cylinders and a drive flange.
2. To screw in the central bolt, previously having greased a carving with glue structure to protect a bolt from unscrewing.
3. To establish a distributor rotor.
4. On engines with 8 valves to oil engine a new sealing ring and to establish it in an ignition distributor flute.
5. To combine ledges on the distributor with dredging on distributive to a shaft and to insert the ignition distributor into a head of cylinders, slightly rotating a rotor a hand for the correct installation.
6. To screw nuts of fastening of the distributor of ignition.
7. To establish a protective waterproof cover.

On the homepage