Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
- 1. Maintenance instruction
   1.2. Governing bodies, devices and equipment
   1.3. Keys
   1.4. Pressure in tires.
   1.5. Doors
   1.6. Mouth of the fuel tank, luggage carrier, cowl
   1.7. Seat belts
   - 1.8. Seats
      1.8.1. Front seats
      1.8.2. Back seats
   1.9. Dashboard
   1.10. Lighting and alarm system
   1.11. Proofreader of light of headlights
   1.12. Washers and cleaners of glasses
   1.13. Additional equipment
   1.14. Ensuring comfort
   + 1.15. Internal heating and ventilation
   1.16. Combinations of devices
   1.17. Start of the petrol engine
   1.18. Start of the diesel engine
   1.19. Control bulbs and indexes
   1.20. Steering wheel, gear shifting and brake
   1.21. Automatic transmission
   1.22. Replacement of a wheel
   1.23. Towage
   1.24. Identification of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



1.8.2. Back seats

GENERAL INFORMATION

Cars with a body like komba are equipped with continuous sitting or two seats with the separating backs.

To incline a back seat forward to horizontal position, it is necessary to pull for an average thong (1) or for thongs (3) and to lift a pillow of back sitting in vertical position.

For lowering of a back (or backs) it is necessary to unblock it, inclining the element of management (2 or 4) located sideways.

When the back is lowered and is in horizontal position, it is necessary to establish correctly an element of management of unblocking (5). It has to serve at the same time as the prop protecting from moving of a back down.


On the homepage