Peugeot 405 + 1. Maintenance instruction + 2. Maintenance + 3. Engines - 4. Fuel system + 4.1. Fuel system with the carburetor + 4.2. Single-point systems of injection of fuel - 4.3. Multipoint systems of injection of fuel 4.3.1. Air filter 4.3.2. Accelerator cable 4.3.3. Systems of injection of fuel 4.3.4. Check and adjustment of systems of injection of fuel 4.3.5. Case of a butterfly valve 4.3.6. Elements of system of injection Bosch L3. 1-Jetronic 4.3.7. Elements of system of injection Bosch LU2 Jetronic 4.3.8. Elements of system of injection Bosch Motronic 4.3.9. Elements of system of injection Magnetti Marelli 4.3.10. Inlet collector 4.3.11. System of air supply of ACAV (model with 16 valves) + 5. Lubrication systems, coolings + 6. System of release + 7. Coupling + 8. Transmissions + 9. Power shafts + 10. Steering + 11. Suspension brackets + 12. Brake system + 13. Body + 14. Electric equipment
|
EARLY MODELS AND ALL MODELS WITH THE AIR FILTER LOCATED ON THE LEFT SIDE OF THE ENGINE
PERFORMANCE ORDER |
|
1. To remove the multicontact plug of the measuring instrument of a stream of air. |
2. To weaken a bracket on the top pipeline of air supply in the engine. |
3. For removal of a cover of the air filter to disconnect the lower brackets and a pipe, to lift a cover and to remove the air filter. |
|
LATER MODELS AND ALL MODELS WITH THE AIR FILTER LOCATED ON THE ENGINE
PERFORMANCE ORDER |
1. To weaken collars and to remove an air supply hose in the engine. |
|
2. To remove two brackets, then to unscrew two screws from a cover of the air filter, to uncover also the air filter. |
|
|
On the homepage
|