Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
- 11. Suspension brackets
   - 11.1. Forward suspension bracket
      11.1.1. Technical characteristic
      11.1.2. Rotary fist
      11.1.3. Replacement of the forward hug bearing
      11.1.4. The lobby is resistant
      11.1.5. Repair of a forward rack
      11.1.6. Lower lever of a forward suspension bracket
      11.1.7. Lower spherical hinge of a forward suspension bracket
      11.1.8. Stabilizer of cross stability of a forward suspension bracket
      11.1.9. Connector of the stabilizer of cross stability of a forward suspension bracket
      11.1.10. Lower frame of a forward suspension bracket
   + 11.2. Back suspension bracket
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



11.1.7. Lower spherical hinge of a forward suspension bracket

GENERAL INFORMATION

Prevention

The special Peugeot 0615J tool is necessary for installation of the lower spherical hinge of a forward suspension bracket. In the absence of this tool to make replacement of the lower spherical hinge at the station.


The special Peugeot 0615J tool for unscrewing of the spherical hinge from a rotary fist


PERFORMANCE ORDER
1. To remove a rotary fist.
2. Remove the lower protective plate of the spherical hinge (it is specified by an arrow).
3. To install the special Peugeot 0615J tool on the spherical hinge, having combined the tool with grooves in the spherical hinge and to fix the tool, screwing an old nut on the spherical hinge. To unscrew the spherical hinge from a rotary fist.

Installation

PERFORMANCE ORDER
1. To screw up by hand the spherical hinge in a rotary fist. To install the special tool, being careful not to damage a protective cover of the spherical hinge and to tighten the hinge the required moment. Using the hammer and a punch to fuller the spherical hinge in one of grooves of a rotary fist.
2. To establish a new protective plate of the spherical hinge.
3. To install a rotary fist together with a nave on the car.

On the homepage