Peugeot 405 + 1. Maintenance instruction + 2. Maintenance + 3. Engines + 4. Fuel system + 5. Lubrication systems, coolings + 6. System of release + 7. Coupling + 8. Transmissions + 9. Power shafts + 10. Steering - 11. Suspension brackets - 11.1. Forward suspension bracket 11.1.1. Technical characteristic 11.1.2. Rotary fist 11.1.3. Replacement of the forward hug bearing 11.1.4. The lobby is resistant 11.1.5. Repair of a forward rack 11.1.6. Lower lever of a forward suspension bracket 11.1.7. Lower spherical hinge of a forward suspension bracket 11.1.8. Stabilizer of cross stability of a forward suspension bracket 11.1.9. Connector of the stabilizer of cross stability of a forward suspension bracket 11.1.10. Lower frame of a forward suspension bracket + 11.2. Back suspension bracket + 12. Brake system + 13. Body + 14. Electric equipment
|
Prevention
At installation of a connector it is necessary to use new nuts of fastening.
Removal
PERFORMANCE ORDER |
1. To lift a forward part of the car and to record on supports. To remove forward wheels. |
2. To unscrew nuts of fastening of connectors to the stabilizer and an arm of a forward suspension bracket. To take them from under the car. |
3. To check a condition of connectors for wear and damages. |
|
Installation
PERFORMANCE ORDER |
For installation of the stabilizer it is necessary to perform operations in the return sequence in relation to removal, paying attention to the correct installation of support and side basic elements. Connectors should be screwed up when the car costs on the earth. |
|
|
On the homepage
|