Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
- 11. Suspension brackets
   + 11.1. Forward suspension bracket
   - 11.2. Back suspension bracket
      11.2.1. Technical characteristic
      11.2.2. Replacement of the shock-absorber
      11.2.3. Replacement of torsions
      11.2.4. Stabilizer
      11.2.5. Suspension bracket lever
      11.2.6. Removal and installation of a back suspension bracket
      11.2.7. Adjustment of height of a suspension bracket of a body
      11.2.8. Naves of back wheels
      11.2.9. Features of a back suspension bracket of cars 4 x 4
      11.2.10. Replacement of a tank
      11.2.11. Removal and installation of the lever of a suspension bracket
      11.2.12. Removal and installation of the cylinder of a suspension bracket
      11.2.13. Removal of air from a hydraulic contour
      11.2.14. Removal and installation of the pump
      11.2.15. Removal and installation of a nave
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



11.2.12. Removal and installation of the cylinder of a suspension bracket

GENERAL INFORMATION

Installation of the cylinder of a suspension bracket

1 – connection of high pressure,

2 – connection bolt,

3 – a piston axis latch on the suspension bracket lever,

4 – cylinder casing,

5, 6 – oil recirculation pipelines

Suspension bracket cylinder fasteners

11 – a gearing spring on a cross-piece,

12 – fastening of springs,

13 – element of fastening of the cylinder,

14 – connections of a casing,

15 – basic element of the cylinder

PERFORMANCE ORDER
1. To install the car on the stationary elevator.
2. To remove the left facing of a luggage carrier.
3. To disconnect the socket (red) of power supply of the hydraulic pump (a wire of M326 and 326).
4. To connect free plugs of the socket near the button of installation of a suspension bracket in the top situation.
5. To reduce pressure so that cylinders of a suspension bracket could be moved with a hand.
6. To unscrew a nut of connection of the cylinder.
7. By means of the screw-driver to remove a latch.
8. To take an element of fastening of the cylinder.
9. To disconnect from the liquid effluence pipeline suspension bracket cylinder (the transparent pipeline) and removals of air (to designate them concerning their rubber tips).
10. To remove a latch of connection of the cylinder of a suspension bracket with the lever (see rice. Installation of the cylinder of a suspension bracket).
11. To take the suspension bracket cylinder from under the car.
12. For installation of the cylinder of a suspension bracket it is necessary to perform operations in the return sequence in relation to removal process. It is necessary to establish new consolidations, to remove air from a contour of a suspension bracket and to fill amount of LHM liquid to necessary level.

On the homepage