Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
- 11. Suspension brackets
   + 11.1. Forward suspension bracket
   - 11.2. Back suspension bracket
      11.2.1. Technical characteristic
      11.2.2. Replacement of the shock-absorber
      11.2.3. Replacement of torsions
      11.2.4. Stabilizer
      11.2.5. Suspension bracket lever
      11.2.6. Removal and installation of a back suspension bracket
      11.2.7. Adjustment of height of a suspension bracket of a body
      11.2.8. Naves of back wheels
      11.2.9. Features of a back suspension bracket of cars 4 x 4
      11.2.10. Replacement of a tank
      11.2.11. Removal and installation of the lever of a suspension bracket
      11.2.12. Removal and installation of the cylinder of a suspension bracket
      11.2.13. Removal of air from a hydraulic contour
      11.2.14. Removal and installation of the pump
      11.2.15. Removal and installation of a nave
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



11.2.13. Removal of air from a hydraulic contour

GENERAL INFORMATION

Pressure regulator


1 – connection of high pressure of a suspension bracket,

2 – deaerator of a contour of high pressure,

3 – connection of the brake system

Elements of a hydropneumatic back suspension bracket (power unit 4 x 4)

 
1 – LHM liquid tank,
2 – cover,
3, 4 – the filter,
5 – jellied stopper,
6 – index,
7 – tank,
8 – pressure sensor,
9 – connection,
10 – heat-shielding casing,
11 – connector,
12 – level sensor,
13 – stabilizer,
14 – pressure regulator,
15 – deaerator,
16 – connections of high and low pressure,
17 – pipeline of removal of liquid,
18 – the pipeline of removal of liquid from suspension bracket cylinders,
19, 20 – pump knot

The deaerator is on pressure regulator.

PERFORMANCE ORDER
1. To connect capacity for removal of air to the regulator deaerator.
2. To open the deaerator.
3. To connect free plugs of the socket near the button of installation of a suspension bracket in the top situation by means of the switch.
4. To connect the socket of power supply of the pump of high pressure.
5. When oil begins to follow in capacity without vials of air, it is necessary to close the deaerator, it is correct (as for normal work) to connect sockets, to fill amount of LHM liquid to necessary level.

On the homepage