Peugeot 405

1987-1997 of release

Repair and operation of the car


Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1. Technical characteristic
   14.2. Detection of not closed chain
   14.3. Generator
   14.4. Starter
   14.5. Replacement of switches
   14.6. Other electric devices
   14.7. Bulbs of external lighting
   14.8. Bulbs of internal lighting
   14.9. External lighting fixtures
   14:10. Adjustment of light of headlights
   14:11. Combination of devices
   14:12. Elements of a combination of devices
   14:13. Hours
   14:14. Screen wiper levers
   14:15. Engine of a screen wiper and draft
   14:16. Engine of a screen wiper of a back door
   14:17. Windscreen washers
   14:18. Radio receiver
   14:19. Loudspeakers
   14:20. Antenna
   14:21. Anticreeping system
   14:22. Safety cushion
   14:23. Safety cushion elements
   14:24. System of heating and ventilation
   + 14:25. Electrical circuitries and charts


e1bd1949


14:17. Windscreen washers

TANK OF WINDSCREEN WASHER OF THE WINDSHIELD AND HEADLIGHTS

The tank is located in the right back corner of a motor compartment.

Removal

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator, then to disconnect an electrical wiring from the pump(s).
2. To unscrew two bolts and to remove a tank.

Installation

Installation is made in the sequence, the return to removal.

TANK OF WINDSCREEN WASHER OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. To open a back door, then to turn a bracket of fastening and to open a cover in the right corner of the luggage compartment for access to a tank.
3. To unscrew two screws (are specified by shooters) fastenings of a tank of windscreen washer of a back door.
4. To remove a tank.

Installation

Installation is made in the sequence, the return to removal.

PUMP OF THE WASHER OF THE WINDSHIELD AND HEADLIGHT

Removal

PERFORMANCE ORDER
Prevention

Before removal of the pump to merge liquid from a windshield washer reservoir.
1. To disconnect a negative wire from the accumulator.
2. To disconnect the electric socket and a hose from the pump, to weaken the pump from the condensing ring in a tank and to remove it.

Installation

Installation is made in the sequence, the return to removal.

PUMP OF THE WASHER OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. To remove a washer reservoir of a back door.
3. To disconnect the electric socket and a hose from the pump, to weaken the pump from the condensing ring in a tank and to remove it.

Installation

Installation is made in the sequence, the return to removal.
On the homepage