Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1. Technical characteristic
   14.2. Detection of not closed chain
   14.3. Generator
   14.4. Starter
   14.5. Replacement of switches
   14.6. Other electric devices
   14.7. Bulbs of external lighting
   14.8. Bulbs of internal lighting
   14.9. External lighting fixtures
   14:10. Adjustment of light of headlights
   14:11. Combination of devices
   14:12. Elements of a combination of devices
   14:13. Hours
   14:14. Screen wiper levers
   14:15. Engine of a screen wiper and draft
   14:16. Engine of a screen wiper of a back door
   14:17. Windscreen washers
   14:18. Radio receiver
   14:19. Loudspeakers
   14:20. Antenna
   14:21. Anticreeping system
   14:22. Safety cushion
   14:23. Safety cushion elements
   14:24. System of heating and ventilation
   + 14:25. Electrical circuitries and charts


e1bd1949 close steam to continue installation



14:19. Loudspeakers

THE LOUDSPEAKERS ESTABLISHED AT DOORS

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. To remove a loudspeaker lattice, having picked up it from below the thin screw-driver or having unscrewed three screws.
3. To unscrew screws (are specified by shooters) fastenings, to remove a loudspeaker from a door and to disconnect the electric socket.
4. Installation is made in the sequence, the return to removal.

THE LOUDSPEAKERS INSTALLED ON PANELS (ON MODELS TILL 1992)

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. To remove a loudspeaker lattice from the top part of the panel.
3. To unscrew screws (are specified by shooters) fastenings, to remove a loudspeaker and to disconnect the electric socket.
4. Installation is made in the sequence, the return to removal.

GRAOMKOGOVORITELI, INSTALLED ON PANELS (MODELS SINCE 1993)

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. By means of the thin screw-driver to take a loudspeaker from the panel and to disconnect the electric socket. The loudspeaker and a lattice make a single whole.
3. Installation is made in the sequence, the return to removal.

THE LOUDSPEAKERS ESTABLISHED ON THE BACK PANEL (MODEL THE SEDAN)

PERFORMANCE ORDER
1. To disconnect a negative wire from the accumulator.
2. Working in the luggage compartment (from a reverse side of the shelf), to disconnect an electrical wiring from a loudspeaker.
3. To release plastic brackets of fastening and to take a loudspeaker through the shelf in interior of the car.
4. Installation is made in the sequence, the return to removal.

On the homepage