Peugeot 405 + 1. Maintenance instruction + 2. Maintenance - 3. Engines - 3.1. Petrol engines 3.1.1. Technical characteristic - 3.1.2. Repair of the engine + 3.1.2.1. The repair which is not demanding removal of the engine + 3.1.2.2. Removal of the engine 3.1.2.3. Installation of the engine 3.1.2.4. Dismantling of the engine - 3.1.2.5. Assembly of the engine 3.1.2.5.1. Cleaning and check of details 3.1.2.5.2. Connecting and radical rods 3.1.2.5.3. Determination of the size of inserts 3.1.2.5.4. Check of a working gap in bearings of a bent shaft 3.1.2.5.5. Bent shaft 3.1.2.5.6. Knot rod piston 3.1.2.5.7. Assembly of knot a rod — a finger piston 3.1.2.6. Start of the engine after capital repairs + 3.2. Diesel engines + 3.3. Petrol engine 1,4 of dm3 + 3.4. System of ignition + 4. Fuel system + 5. Lubrication systems, coolings + 6. System of release + 7. Coupling + 8. Transmissions + 9. Power shafts + 10. Steering + 11. Suspension brackets + 12. Brake system + 13. Body + 14. Electric equipment
|
The traffic jams closing technological openings which need to be taken for full cleaning of the block of cylinders
|
Traffic jams are specified by shooters. |
Never it is impossible to shabrit the surfaces of connection of the details made of light alloys; it is necessary to use special cleaning means (Magnus Magstrip or Framet Decaploc).
For full cleaning of the block of cylinders to take technological traffic jams for what to drill in them openings, to screw in the self-cutting screws and for screws to take traffic jams. After cleaning of the engine to establish new traffic jams. Irrespective of the used method of cleaning of the block of cylinders it is necessary to be convinced that all openings and channels are completely cleared and dried up.
|
On the homepage
|