Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Fuel system
   - 4.1. Fuel system with the carburetor
      4.1.1. Fuel pump
      4.1.2. The fuel level sensor in a tank
      4.1.3. Fuel tank
      4.1.4. Removal and installation of the carburetor
      4.1.5. Dismantling of the carburetor
      4.1.6. Operation of the carburetor
      4.1.7. Adjustment of the carburetor
      4.1.8. OVAD starting arrangement
      4.1.9. Subsequent cooling of the engine
      4.1.10. Inlet collector
      4.1.11. Final collector
   + 4.2. Single-point systems of injection of fuel
   + 4.3. Multipoint systems of injection of fuel
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



4.1.2. The fuel level sensor in a tank

Removal and installation

PERFORMANCE ORDER
1. To remove a weight wire from the accumulator.
2. For access to the sensor to remove back sitting.
3. To remove a plastic cover for access to the fuel level sensor in a tank.
4. To disconnect wires and hoses (V) from the sensor (And – the electric socket).
5. To note the provision of a cover of the sensor, to unscrew a ring and to remove the fuel level sensor.
6. At installation of a cover of the sensor to use only a new sealing ring.

On the homepage