Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Technical characteristic
      8.2.2. Description of the drive
      8.2.3. Removal and installation of the transmission
      8.2.4. Adjustment of management of gear shifting
      8.2.5. Cable of the choice of transfers
      8.2.6. Selector lever
      8.2.7. Cable of compulsory inclusion of a low gear
      8.2.8. Adjustment of a tape of a brake
      8.2.9. Removal and installation of the operating servomotor
      8.2.10. Replacement of a sealing ring of an axis of the selector
      8.2.11. Transmission heat exchanger
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



8.2.10. Replacement of a sealing ring of an axis of the selector

PERFORMANCE ORDER
1. To remove the air filter.
2. To remove the accumulator and its holder.
3. To separate a cable of management of gear shifting from the selector lever.
4. To remove the lever of the selector of the automatic transmission.
5. To modify a standard flat lining in the sequence reflected in drawings.
6. To establish the modified lining instead of the lever of the selector and to record by means of earlier unscrewed nut.
7. To drill a sealing ring a drill with a diameter of 2,5 mm through small openings in a lining. It is necessary to weaken a ring and to facilitate its extraction.
8. To unscrew a nut and to screw in two self-cutting the screw in big openings of a lining.
9. To install special adaptation of 3084 T under the processed lining and to take a sealing ring.
10. To grease a new sealing ring and to establish it by means of the plug of the corresponding diameter.
11. To install the lever of the selector and to connect it to a cable of management of gear shifting.
12. To establish the accumulator and its holder.
13. To install the air filter.

On the homepage