Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Technical characteristic
      8.2.2. Description of the drive
      8.2.3. Removal and installation of the transmission
      8.2.4. Adjustment of management of gear shifting
      8.2.5. Cable of the choice of transfers
      8.2.6. Selector lever
      8.2.7. Cable of compulsory inclusion of a low gear
      8.2.8. Adjustment of a tape of a brake
      8.2.9. Removal and installation of the operating servomotor
      8.2.10. Replacement of a sealing ring of an axis of the selector
      8.2.11. Transmission heat exchanger
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



8.2.4. Adjustment of management of gear shifting

GENERAL INFORMATION

Adjustment of management of gear shifting

1 – spherical hinge,

2 – control lever gear shifting

PERFORMANCE ORDER
1. To remove knot of the air filter.
2. To separate the spherical hinge (1) of management of gear shifting (2) from the selector lever.
3. To install the selector lever against the stop forward (situation "P").
4. In salon to install the gear shifting lever in situation "P".
5. It is easy to pull a cable of management of gear shifting and to change (screwing in or unscrewing) position of the spherical hinge so that it settled down opposite to the spherical hinge of the lever of the selector.
6. To connect a cable of management of gear shifting to the selector lever.
7. In salon several times to move the gear shifting lever from an emphasis against the stop, and then to check whether the car in situation "P" is fixed.

On the homepage