Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Technical characteristic
      8.2.2. Description of the drive
      8.2.3. Removal and installation of the transmission
      8.2.4. Adjustment of management of gear shifting
      8.2.5. Cable of the choice of transfers
      8.2.6. Selector lever
      8.2.7. Cable of compulsory inclusion of a low gear
      8.2.8. Adjustment of a tape of a brake
      8.2.9. Removal and installation of the operating servomotor
      8.2.10. Replacement of a sealing ring of an axis of the selector
      8.2.11. Transmission heat exchanger
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


8.2.6. Selector lever


Selector lever


1. To lift a forward part of the car and to record on supports. To install the selector lever in situation "P".
2. To remove the central console.
3. To disconnect a cable from the lever of the selector and a suspension bracket of installation.
4. To unscrew a bolt of fastening of the lever of the selector to a floor and to take the selector lever assembled from the car.


Installation is made in the sequence, the return to removal then it is necessary to make adjustment of a cable of the selector.

On the homepage