Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
- 8. Transmissions
   - 8.1. Mechanical transmission
      8.1.1. Technical characteristic
      8.1.2. Replacement of oil in the transmission
      8.1.3. Adjustment of draft of gear shifting
      8.1.4. Gear shifting lever
      8.1.5. Draft of gear shifting
      8.1.6. Cable of blocking of turning on of the reverse gear
      8.1.7. Sealing rings
      8.1.8. Backing lamp switch
      8.1.9. Speedometer drive
      8.1.10. Removal and installation of the transmission
      8.1.11. Dismantling of the transmission
      8.1.12. Repair of differential
      8.1.13. Repair of a main shaft
      8.1.14. Repair of a secondary shaft
      8.1.15. Assembly of the transmission
      8.1.16. Definition of a tightness of the conic bearing of a main shaft
      8.1.17. The strengthened sealing rings
      8.1.18. Distinctive features of the drive 4 x 4
      8.1.19. Transfer case of system of the drive 4 x 4
   + 8.2. Automatic transmission
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment


e1bd1949



8.1.4. Gear shifting lever

Removal

PERFORMANCE ORDER
1. To remove the central console.
2. On early models of cars to disconnect a cable of blocking of turning on of the reverse gear from a control lever the transmission.
3. To unscrew and take a bolt of fastening of thirst (2) for a gear shifting lever fork on the lower part of a control lever the transmission. The bolt is available through openings (1) sideways of a plastic casing of support of a control lever the transmission (3 – the grounding tire).
4. To remove a casing and a control lever the transmission.
5. For separation of the lever from a casing to remove a bracket, to take two half rings of fastening of a spherical head of the lever together with the lever.

Installation

Installation is made in the sequence, the return to removal, at the same time to grease with a thin layer of lubricant a spherical head of the lever.

On the homepage