Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment

13:11. Cowl lock cable

GENERAL INFORMATION

The cable of the lock of a cowl consists of two parts: the body connects the lever of opening of a cowl to a connecting level, the second part connects locks.

CABLE OF OPENING OF THE COWL

Removal and installation

PERFORMANCE ORDER

	1. To unscrew two bolts fixing the lever of opening of a cowl to a suspension bracket under the panel.
2. In a motor compartment to take the connecting level of a cable located behind the forward panel over a radiator.
	3. In the presence to remove an element of an anti-tinkling sound and to disconnect a cable from a connector.
4. To tie a thin strong cord to the end of a cable and to exempt a cable from all fastenings on all its length.
5. To take a cable in interior of the car. When the end of a cord seems from a partition of a motor compartment, to untie it from a cable of opening of a cowl and to leave in the car. The cord will need to be used for tightening to the place of a new cable.
6. At installation of a cable on the former place to tie the end of a new cable to a cord in interior of the car.
7. For a cord to involve a cable of opening of a cowl in a motor compartment.
8. To check that the condensing ring of a partition was not displaced at installation of a cable.
9. Further installation is made in the sequence, the return to removal.

CONNECTING CABLE

Removal and installation

PERFORMANCE ORDER

1. In a motor compartment to take the connecting level of a cable located behind the forward panel over a radiator.

2. In the presence to remove an element of an anti-tinkling sound and to disconnect a cable from a connector.

3. To disconnect a cable from the lock and a cable cover from a suspension bracket on the lock, to exempt a cable from all fastenings on all its length and to remove a cable, noting its arrangement. For improvement of access to the lock it is desirable to remove a front grille.

4. Installation is made in the sequence, the return to removal.

On the homepage