Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


13:14. Doors



1, 2 – forward doors,
3, 4 – back doors,
5 – loop,
6, 7 – the regulating plates


These are exact and labor-consuming operations and they should be carried out together.


Hinges of a door are welded on a rack and fasten bolts to a door.

1. To remove by means of the lever plastic heads from hinged fingers.
2. Using a punch with a thin sting, to beat out a cylindrical pin from the limiter of opening of a door.
3. If at doors there are any electric elements, to remove an upholstery of a door and a protective film.
4. To disconnect sockets from electric elements and brackets of fastening.
5. To remove the rubber condensing ring from a first line of a door.
6. To take an electrical wiring from a door.
7. Supporting a door, to unscrew hinged fingers (shooter) from hinges and to remove a door. When performing this operation glass has to be lowered, and the second person has to hold doors.
8. To remove doors, paying attention not to damage a surface.


1. Installation is made in the sequence, the return to removal, at the same time hinged fingers have to be established so that their heads were directed to each other.
2. By means of the regulating plates to adjust gaps of a prileganiye of doors.

Adjustment of provision of a door (early models)

The provision of a door can be adjusted by the laying established between the hinge and a door. For addition or removal of laying it is necessary to weaken the bolts fixing the hinge to a door.

On the homepage