Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


e1bd1949



13:26. Hatch

GENERAL INFORMATION

Because of complexity of the mechanism of the drive of the hatch considerable experience and knowledge is necessary to restore, replace or adjust hatch elements. Access to elements of the hatch requires removal of an upholstery of a ceiling that is very difficult operation. Therefore this work needs to be performed at the station.

HATCH DRIVE ENGINE

Removal

PERFORMANCE ORDER
1. To remove a negative wire from the accumulator.
2. To remove the switch of light and a plafond of a lamp from the ceiling panel for access to screws of fastening of the panel.
3. To remove sun-protection peaks.
4. To unscrew screws and to remove the panel from a ceiling. To disconnect the electric socket from a back part of the panel.
5. To unscrew a bolt of fastening of the tire of grounding.
6. To remove a relay suspension bracket from a ceiling.
7. To unscrew three screws (are specified by shooters) and to remove motor assembly from a ceiling.

Installation

Installation is made in the sequence, the return to removal.

On the homepage