Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


e1bd1949



13:21. Lock of a back door (model of Kombi)

CYLINDER OF THE LOCK OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. To open a back door.
2. To unscrew screws of fastening and to remove plastic finishing from an internal part of a back door.
3. Working around edge of carpet finishing, to release brackets of fastening and to remove carpet finishing.
4. To drill rivets (are specified by shooters) fastenings of the cylinder of the lock to a back door.
5. To disconnect draft and to remove assembly of the cylinder of the lock from a back door.

Installation

Installation is made in the sequence, the return to removal. At the same time it is necessary to use new rivets of fastening of the cylinder of the lock.

LOCK OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. To open a back door.
2. To unscrew screws of fastening and to remove plastic finishing from an internal part of a back door.
3. Working around edge of carpet finishing, to release brackets of fastening and to remove carpet finishing.
4. To unscrew two bolts (are specified by shooters) fixing the lock to an arm.
5. To disconnect draft and to remove the lock from a back door.

Installation

PERFORMANCE ORDER
Installation is made in the sequence, the return to removal. Before installation of finishing of a back door to check operation of the lock and if it is necessary, to adjust, moving the lock within the extended openings under fastening bolts.

On the homepage