Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


e1bd1949



13:27. Removable elements of a body

FRONT GRILLE

Removal

PERFORMANCE ORDER
1. To open a cowl.
2. To unscrew forward screws of fastening of a front grille.
3. To unscrew bolts (are specified by an arrow) fastenings of the top corners of a lattice which are located over the top internal corners of headlights.
4. To release a fastening bracket, then to take a pin the cowl lever fixing squeezing to a latch.
5. To lift a lattice up, to disconnect the lower ledges of a lattice and to remove a front grille from the car.

Installation

Installation is made in the sequence, the return to removal.

LATTICE BEFORE THE WINDSHIELD

Removal

PERFORMANCE ORDER
1. To remove levers of screen wipers.
2. To disconnect a glass washer hose from the T-shaped splitter on the right side of a lattice.
3. To unscrew four screws of fastening of a lattice.
4. To remove a bracket, the fixing left side of a lattice.
5. To take a back part of a lattice from a sealant and to remove from the car.

Installation

Installation is made in the sequence, the return to removal.

SLIPS AND EMBLEMS

Slips and emblems are fixed on a body with use of a special adhesive tape.

Removal

PERFORMANCE ORDER
1. For removal of slips and emblems to heat them for a glue softening, to insert a nylon cord between a slip and a body and, moving it to the parties, to cut off a slip.
2. To completely clear all traces of glue methyl alcohol.

On the homepage