Peugeot 405

1987-1997 of release

Repair and operation of the car

Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


13:24. External rear-view mirrors


The set of various types of rear-view mirrors can be established depending on model and date of production of the car.



1. On models with mirrors with electroheating to remove an upholstery of a door and to separate plastic foil from a door for access to electric sockets.
2. To disconnect sockets.
3. By means of the lever to remove a plate of finishing of a mirror from an internal forward corner of a door.
4. To weaken the screw and to remove the regulator button from a finishing plate.
5. To remove consolidation.
6. To remove the condensing ring.
7. To unscrew four screws (are specified by shooters) fastenings of a mirror.
8. To remove outside a mirror.


Installation is made in the sequence, the return to removal.


Many various methods of fastening of glass of a mirror are used.

On some mirrors glass is not subject to replacement and it is necessary to make replacement of a mirror assembled.

On early models glass can be fixed with use of sticky plates, on later types of a mirror glass can be supported by a bracket of fastening of an electrical wiring or a ring of blocking.


1. For removal of glass of the mirror fixed by a blocking ring to incline glass completely up, then to insert the screw-driver of the lower part of glass and to disconnect a blocking ring.
2. For removal of glass of the mirror fixed by a bracket (in the drawing at the left) an electrical wiring, from bottom edge of glass to unclench a fastening bracket.
3. To remove glass of a mirror and to disconnect an electrical wiring.


The mechanism of adjustment of provision of a mirror compound with assembly of a mirror. If it is faulty, the mirror needs to be replaced assembled.

On the homepage