Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


e1bd1949



13.6. Rear bumper

SEDAN MODELS

Removal

PERFORMANCE ORDER
1. To lift a back part of the car and to record on supports.
2. To remove inserts of an arch of a back wheel (access to inserts of an arch of a back wheel can be improved if to remove back wheels).
3. To unscrew bolts of fastening of a side part of a bumper (one bolt on each party).
4. Working under the bumper basis, to unscrew two lower bolts of fastening of a bumper.
5. Working in the luggage compartment, to arrange the socket of illumination of registration plate near the left lamp of a backing and to disconnect the socket.
6. To extend a bumper from the car and to take a plait of wires of illumination of registration plate through the condensing ring in the back panel of a body.

Installation

Installation is made in the sequence, the return to removal.

KOMB MODELS

Removal

PERFORMANCE ORDER
1. To lift a back part of the car and to record on supports.
2. To remove inserts of an arch of a back wheel (access to inserts of an arch of a back wheel can be improved if to remove back wheels).
3. On models with the back boards under a car body located from two parties of a bumper to lower a back part of system of production of exhaust gases for access to the left back board.
4. To remove back boards under a car body for access to side bolts of fastening of a bumper.
5. To unscrew bolts of side fastening of a bumper (one bolt on each party of a bumper).
6. To unscrew two bolts of fastening of a bumper from each party to a body and to take a bumper from the car.

Installation

Installation is made in the sequence, the return to removal.

On the homepage